泰州市夜总会-泰州市夜总会_第1页

在广西酒店晚上怎么叫服务

 Qianjin closing net reinforced expanding net factory
Popular keywords: Construction pictures of closure net Closing net of post pouring belt Net price Closing mesh Net price How to use the closing net BDF steel cage

Construction closing net with galvanized post cast strip

  • Time: 2020-07-29 05:14:03 Views: Author
In the construction of post pouring belt, the permanent concrete formwork of building closure net is adopted. The formwork of construction closing net is made of hot-dip galvanized steel plate. Mesh and reinforcement are formed by mechanism. Firstly, it is cut and punched out, and then the reinforcement is rolled out. At the same time, the material in the middle is stretched to form a kind of drawn metal mesh. The net is a kind of permanent formwork, which is mainly composed of mesh part and U-shaped section reinforcement. It can save the concrete poured and connect with these concrete to form a surface. This surface can be bonded with the newly poured concrete without any treatment, and is mainly used to form the construction suture of concrete.
 
 
When the concrete is poured behind the formwork, the diagonal pieces on the mesh are embedded in the concrete to form a mechanical wedge connected with the adjacent pouring concrete. The steel mesh formwork with quick and easy closing is non dense and multi hole, which is helpful to dissipation of pore water pressure, and its hydrostatic pressure is much smaller than that of plywood.
 
The steel mesh of galvanized construction closing net with post cast strip can be used together with common supporting devices. Generally, steel bars with appropriate shape are used to replace the screw rod of wood formwork, and iron wire can be directly used to tie the support to the steel bar; when the formwork is installed, the quick and easy closing mesh bar can be placed horizontally or vertically to adapt to various construction situations. The supporting member and the reinforcement of the formwork form a right angle, and the formwork shell is restrained by the support during pouring. The adjacent formwork surface shall be lapped, and the outer reinforcement shall be tied with iron wire every 150 mm, and the edge of the formwork surface shall exceed 150 mm. With the rapid and easy closing net template, the time is saved and the effect is good. There is no crack on the surface of the post pouring belt and no leakage in the bottom plate.
 Construction closing net with galvanized post cast strip
 Construction closing net with galvanized post cast strip
 
 Construction closing net with galvanized post cast strip

 
 Construction closing net with galvanized post cast strip
Last article: Reinforced expansion cage Next: no more