天津站按摩女上门服务-天津站按摩女上门服务_主页

在广西酒店晚上怎么叫服务

 Qianjin closing net reinforced expanding net factory
Popular keywords: Construction pictures of closure net Closing net of post pouring belt Net price Closing mesh Net price How to use the closing net BDF steel cage
Your current position: homepage > common problem >

What's the use of closing net

  • Time: 12:39:34, September 20, 2020 Author
The closure network, also known as the template free network, Bai is fixed as a consumable template. When the concrete is poured behind the formwork, the remaining corner pieces on the Dao mesh are embedded in the concrete to form a mechanical wedge connected with the adjacent pouring block. The quality of joints is strictly controlled. The bond and shear strength is comparable to that of well treated rough cut stitching. It can shorten the casting process and shorten the casting cycle.

What is the main function of the network? Like this kind of very professional questions for our customers who are not familiar with when purchasing the network do not know how to answer, but for the professionals of our factory, all the information about the products of the network has been thoroughly understood. Now let's introduce it to you by Xiao Yang of Landsea business department! Just listen to its name, you may not know what it is used for. As soon as you say "free template network", you will imagine that it is fixed as a consumable template.
The closing net, also known as the non dismantling formwork net, is fixed as a consumable formwork. When the concrete is poured behind the formwork, the remaining corner pieces on the mesh are embedded in the concrete to form a mechanical wedge connected with the adjacent pouring block. The quality of joints is strictly controlled. The bond and shear strength is comparable to that of well treated rough cut stitching. During the second pouring, the process of drilling and roughening can be avoided, the construction period can be shortened, and the strength of the pouring body can be increased at the same time.
 Sealing net
A rough surface is formed at the interface of the closing net, which provides an ideal joint surface for the next continuous pouring. The second pouring operation can be carried out without manual chiseling, roughing, cleaning and curing, so that the new and old concrete can be combined into a solid whole and prevent leakage. At the same time, it can avoid the impact on the structure damage due to the vibration of chiseling and roughing.    
The mesh hole of the closing net can help disperse the water pressure produced by cement mortar during pouring, reduce the pressure of pouring concrete by 2 / 3, which is much less than the side pressure of traditional formwork, which can greatly save the formwork support and reduce the cost of labor and materials.   
After pouring concrete, the closing net is left in the surface layer, which can play a reinforcing role and prevent the concrete surface from drying shrinkage and temperature shrinkage cracks. It is convenient for reinforcement threading and continuous binding. By the porosity of the closure net, a dense special grid can be used to pass through with a little force. The steel bars with larger diameter can be cut through the mesh until the reinforcement passes through the back plate and returns to the position. The closing net can also be installed before the binding of reinforcement, and then can be inserted through the mesh.  
 hy-rib
The closure net industry needs the strong support of the state, to be bigger and stronger, to control the quality, to improve the production efficiency, and to lay a solid foundation for Anping wire mesh to go to the world. The adjacent formwork surface shall be overlapped and overlapped, and the reinforcement on the outer side shall be tightened with a spacing of about 150 mm. The edge of formwork surface shall exceed the support by 150 mm. The reinforcement can be placed horizontally or vertically during the installation of the formwork of the closing net, so as to adapt to various situations. During the pouring, the supporting parts restrain the template shell. The supporting parts shall be at right angles to the reinforcement of the formwork to support the formwork.