沈阳洗头房-沈阳洗头房_主页

在广西酒店晚上怎么叫服务

 Qianjin closing net reinforced expanding net factory
Popular keywords: Construction pictures of closure net Closing net of post pouring belt Net price Closing mesh Net price How to use the closing net BDF steel cage
Your current position: homepage > common problem >

The manufacturer of the closing net of the post pouring belt? Pictures and construction methods.

  • Time: June 3, 2020 09:51:19 Views: Author
 Closing net of post pouring belt

Quick and easy Closing net of post pouring belt Attention should be paid to the following points in engineering application:
 
1. The construction and setting out of the fast and easy post pouring belt closing net shall be carried out, and the temporary support of diagonal bracing shall be established according to the bottom edge line of the wall.
 
2. Transfer the closing net of quick and easy post pouring belt in place and erect the formwork net (the formwork net is used to be fixed temporarily). The closure net of quick and easy post pouring belt is made up of dense special grid with the porosity of the net. With a little force, the steel bar below 12mm can be used to pass through. The steel bars with larger diameter can be cut through the mesh until the reinforcement passes through the back plate and returns to the position. The quick and easy post pouring belt closing net can also be installed before binding the reinforcement, and then can be inserted through the mesh hole.
 
3. After the whole wall is in place, the height along the ground
 
M and 2.5m are supported horizontally by Φ 48 steel pipe, and the iron wire is fixed on the formwork stiffening rib to control the flatness and integrity of the wall. The closing net of post pouring belt, also known as non dismantling formwork net, is fixed as consumable formwork. When the concrete is poured behind the formwork, the remaining corner pieces on the mesh are embedded in the concrete to form a mechanical wedge connected with the adjacent pouring block. The quality of joints is strictly controlled. The bond and shear strength is comparable to that of well treated rough cut stitching. During the second pouring, the process of drilling and roughening can be avoided, the construction period can be shortened, and the strength of the pouring body can be increased at the same time.
 
4. Adjust the concrete diagonal bracing to control the flatness and straightness of the wall to meet the standard requirements.
 
5. Irrigate concrete in the center of wall component. Because of its special mesh, the closure net of post cast strip can be used to monitor the pouring works with naked eyes, thus reducing the risk of pores and honeycomb. It is only one tenth of the weight of the common set steel mould, which is quick to install and easy to transport. The permanent formwork can bond the next pouring concrete without removing the formwork or making joints. Therefore, the interface preparation is simplified.
 
Quick and easy Closing net of post pouring belt Also known as the template free network, it is fixed as a consumption template. When the concrete is poured behind the formwork, the remaining corner pieces on the mesh are embedded in the concrete to form an adjacent
 
A mechanical wedge connected near the casting block. A complete template net includes two parts: V-shaped mesh and steel mesh. The stiffness of V-shaped mesh and continuous parallel V-shaped mesh are the main source of strength of steel mesh. The steel mesh can be curved along the V-shaped parallel direction. There are regular punching holes on the steel mesh surface, and the protruding die plate on the punching hole has the function of strengthening the combination between the steel mesh and the material. The quality of joints is strictly controlled. Its strength in adhesion and shear is comparable to that of well treated rough cut stitching. During the second pouring, the process of punching and roughening can be avoided, the construction period can be shortened, and the strength of the pouring body can be increased at the same time.
 
The factory has stock of post cast belt closing net all year round. Please call us for details. Because of its special mesh, the closure net of post cast strip can be used to monitor the pouring works with naked eyes, thus reducing the risk of pores and honeycomb. It is only one tenth of the weight of the common set steel mould, which is quick to install and easy to transport. The permanent formwork can bond the next pouring concrete without removing the formwork or making joints. Therefore, the interface preparation is simplified.
 Closing net of post pouring belt